7.3 Connecting External Input and Output Terminals
7.1 Appendix
EVENT2
Event output terminal
2
T.
B.
2
Relay contact It is turned
according to the
program or the set value of
EVENT
parameter in
Explanation
I
START
input terminal
Time program is started
by
shorting this terminal
with COM terminal.
STOP
I
is stopped
by
shorting this terminal
input terminal
with COM terminal.
I
COM.
COM terminal for START and STOP terminals.
I
(1)
Strip the sheath of the connecting cable for approximately
in
at
the
end.
(It
is unnecessary for supplied
remote cable.)
When
the
core wire is solid, insert it into the hole of a terminal
while pressing the button above the hole using a small
screwdriver. When the wire is stranded, twist the end well
and insert it into the hole while pressing the button above
the
hole using a small screwdriver.
To disconnect the cable,
press the button and remove the cable from the terminal.
(2)
A
remote cable is supplied with the
To
protect the
cable wire
breaking, use stranded cables. When connecting
two
or
more circuits to the terminal, use the following wires
with core diameter
as
indicated below:
Stranded wire
Element wire diameter
:
0.18 at the minimum
Solid wire
(AWG
26-18)
:
(AWG
22-20)
7-1
1
RID-1OA
Summary of Contents for RID-10A
