Shimadzu RID-10A, User Manual

Page: 41 / 112

5.2 Fundamentals of Operation
2.
Display unit
RI Displays refractive index (unit :
Displays full scale of refractive index output to the recorder terminal (unit
:
mode Displays measurement mode.
shift Shift key indicator lamp.
prog run
remote
Time operation indicator lamp. Lights when time program is being executed.
Remote mode indicator lamp. Blinks when by
If
NOT
PROTECTED
)
message is displayed and an alarm sounds
after turning the power
ON,
press key. When this message is
displayed, the time program
is
When any other error message
is
displayed, turn the power
OFF
and contact your Shimadzu Service Representative.
temp
The display unit consists of display screen and indicator lamps as
shown below.
Lights when the power is being supplied to the temperature controlled heater for optical
system unit.
No. Display ordescription
Function
R flow
Reference flow indicator Lights when the liquid is being supplied to the reference
flow line side.
Polarity indicator lamp.
balance Displays position of the light on photodiode.
3. Keyboard
The nineteen keys on the front
are
used for operation and
settings and classified into the following
three
types.
(1) keys
Press these keys to perform a specified operation immediately
( [Zero
key, etc.)
(2)
keys
Press these keys after pressing a
shift
key to perform a
specified key, etc.).
5-4
RID-1OA