Shimadzu RID-10A, User Manual

Page: 71 / 112

7.2
Control
from the
4.
DET CONTROL screen
Press
I
in the
main
menu screen to select the
DETECTOR CONTROL
screen.
The detector parameters, which cannot be input on the
screen, can input on the
CONTROL screen. These detector parameters
control the operation of the detector the
SCL
(described in
section 5.2, Fundamentals of Operation).
Press the SCL keyboard to
turn
ON the lamp.
the lamp is lit, the parmeters set in this screen
are sent to the detector.
(Example)
If the parameter is set
to
-1, the LED
for polarity on the
detector is lit and the polarity is reversed.
D E T E C T O R C O N T R O L
F I L E 0
- - - - - -
R I D
R A N G E
R E S P 5
P O L - 1
C E L L . T
M O D E
0
A U X 3
In the
screen above, where the
RID-1OA is connected
as
detector
A,
the and parameters for
one detector are displayed.
When no detector is connected, the following display appears in the
center of the screen.
D E T E C T O R
I S
N O T C O N N E C T E D
When two detectors are connected, use the function keys
and to switch between detectors.
(1)
Press to change the function display to the following
display:
7-5
RID-1OA