Sharp Notevision PG-M25X Operation Manual Download Page 125

Page: 125 / 131

Appendix

-121

Usable Cards and Their Capacity

1. JPEG images that are DCF compliant *

and are stored in a memory card such as those

from a digital camera, can be displayed in the projector when using the Card mode.

2. The memory cards in the following table (commercially available) can be used.

Memory Card *

Memory card capacity

Flash ATA card

under 128MB can be used.

SD memory card

under 128MB can be used.

CompactFlash

under 128MB can be used.

Multimedia card

under 64MB can be used.

Smart media

under 128MB can be used.

* Each memory card requires a suitable PC Card Adapter.

Caution

(1) Operation cannot be guaranteed for other memory cards except for those mentioned

above.

(2) PC Card Adapters may have special regulations according to the memory cards. For

details, see the PC Card Adapter’s operation manual.

(3) In some cases, part of images edited on your computer may not be played.

DCF standard stands for Design rule for Camera File system.

•

SD memory card is a trademark.

•

CompactFlash is a trademark of San Disk Corporation.

•

Multimedia Card is a trademark of Infineon Technologies AG.

•

Smartmedia is a trademark of Toshiba Corporation.

Summary of Contents for Notevision PG-M25X




































































































































Search results

Summary of Contents for Notevision PG-M25X

Reviews:

Related manuals for Notevision PG-M25X

Brands by name

Popular brands

Sharp Notevision PG-M25X, Operation Manual

Search results

Summary of Contents for Notevision PG-M25X

Reviews:

Related manuals for Notevision PG-M25X

Brands by name

Popular brands