Sharp Notevision PG-M25X Operation Manual Download Page 84

Page: 84 / 131

Memory Card Settings (cont.)

-80

Setting the Display In-
terval for Image Files

You can set the display interval for slide show
files (image files).

Adjust “Interval” in the Memory Card
menu on the menu screen.

➝

For operating the menu screen, see

pages 50 to 55

Pressing the

button during image

projection via the Autorun function will
display the submenu.

•

Next
Proceeds to the next page.

•

Previous
Moves back one page.

•

Index Mode
Quits automatic display of images.
The screen returns to Index mode.

Info

If the following operations are executed
during Autorun, Autorun will stop.

•

AV MUTE, Break Timer, INPUT, LENS.

•

Pressing

to select the Index mode.

Note

•

During Slide Show playback, the OSD
message “Please wait.” will appear be-
tween slides. This message can be elimi-
nated by selecting “

Level A” or “

Level B” in “OSD Display”. See

page

to disable OSD messages.

•

Depending on the type of memory card
and the size of the image file, the image
display interval may be longer than the set
time.

Summary of Contents for Notevision PG-M25X




































































































































Search results

Summary of Contents for Notevision PG-M25X

Reviews:

Related manuals for Notevision PG-M25X

Brands by name

Popular brands

Sharp Notevision PG-M25X, Operation Manual

Search results

Summary of Contents for Notevision PG-M25X

Reviews:

Related manuals for Notevision PG-M25X

Brands by name

Popular brands