Easy to Use Functions
-89
4
Press
to move the inset pic-
ture.
•
The inset picture will be moved to the
inset picture frame.
Note
•
The inset picture can only be displayed
with composite video (NTSC/PAL/
SECAM) or S-Video signal.
•
The Freeze function works only with the
inset picture, when the Pict in Pict mode
is in operation.
When the signal entered into INPUT 1 is
as follows, Pict in Pict does not work:
•
With a resolution that exceeds SXGA.
•
When the input signal is 480
I
, 480P,
720P or 1080
I
.
•
When the input signal has changed to
the Interlace mode using RGB signals.
•
When the picture display mode is set to
“DOT BY DOT”.
•
When no signals are sent to INPUT 1,
or when the resolution or refresh rate
(vertical frequency) is changed.
•
You can use
on the GyroRemote or
on the projector to change the inset
picture.
Activating the
sRGB
Color Management Function
Setting the Color Manage-
ment Function (sRGB)
Select “sRGB” in the “Options (1)” menu
on the menu screen.
➝
For operating the menu screen, see
pages 50 to 55
.
Note
•
For additional information about sRGB
function, please visit “http://www.srgb.com/”.
Info
•
When setting sRGB to “ON”, the pro-
jected image may become dark; however,
this does not indicate a malfunction.
When “sRGB” is set to “ON”;
•
The gamma correction cannot be set.
•
“Red”, “Blue” or “CLR Temp” in “Picture”
cannot be adjusted.
This function calibrates the projector’s output to conform to “sRGB standard (6,500K)”.
Summary of Contents for Notevision PG-M25X
