-102
Setting the
Anti-Theft
-102
Entering the Keycode
•
“Anti-Theft” cannot be selected unless
“Password” is set. (See
page
100
.)
•
When “Anti-Theft” is selected, the password
input box will appear. Enter the keycode af-
ter the right password is entered.
Select “Anti-Theft” in the “Options (2)”
menu on the menu screen.
➝
For operating the menu screen, see
pages 50 to 55
.
1
Press any button on the pro-
jector or on the GyroRemote,
to enter the keycode.
Note
•
The following buttons cannot be set
as key codes.
(Both on the projector and
GyroRemote)
•
POWER button
•
ENTER button
•
UNDO button
•
MENU button
(GyroRemote)
•
GYRO ACTIVE button
•
POINTER button
•
L-CLICK/ENTER button
•
R-CLICK/UNDO button
•
MENU button
•
TEACH button
•
RF CH+ button
The anti-theft function prevents unauthorized use of the projector. You can choose to use
this function or not. If you do not want to use this function, just do not enter the keycode.
Once the theft-deterrent function is activated, users will need to enter the correct keycode
each time the projector is started. Failure to enter the correct keycode will prevent images
from being projected. The following procedures explain how to use this function.
Summary of Contents for Notevision PG-M25X
