Easy to Use Functions
-103
2
Enter the remaining 3 digits by
pressing any buttons you like.
3
Enter the same keycode once
more in “Reconfirm”.
Note
•
The Keylock function will become
temporarily disabled.
When “Anti-Theft” is set, the keycode
inputting section appears after the
power is turned on. At that time, enter
the right keycode.
•
Press the buttons on the GyroRemote if the
buttons on the GyroRemote are used for set-
ting the keycode. In the same manner, press
the buttons on the projector if the buttons on
the projector are used for setting the keycode.
Info
•
Once the function is activated, you must
remember the correct keycode. We sug-
gest you record the keycode in a safe
place where only authorized users will
have access. If you lose or forget your
keycode, you will need to contact your
nearest Sharp Authorized Projector Dealer
or Service Center (see
page
118
). You
may need to bring your projector to them
to restore the projector to original factory
condition (password and keycode reset).
•
If the Anti-theft function is set using the
buttons of the GyroRemote as the
keycodes and you loose the
GyroRemote, you will not be able to re-
lease the Anti-theft function. In case you
loose the GyroRemote, contact your
nearest repair center.
•
If you travel with your projector without
your GyroRemote, you will not be able to
unlock the Anti-Theft keycode.
Therefore, we recommend you use the
projector buttons to lock/ unlock the Anti-
Theft keycode.
Summary of Contents for Notevision PG-M25X
