Sharp Notevision PG-M25X Operation Manual Download Page 81

Page: 81 / 131

Easy to Use Functions

-77

Projecting a file

•

Press

select the file and press

•

The image of the selected file is
displayed.

•

If you press

while the image is

displayed, the submenu is displayed.

•

Proceeds to the next page.

•

Previous
Moves back one page.

•

Rotate (right)
Turns the image to the right by 90°.

•

Rotate (left)
Turns the image to the left by 90°.

•

Index Mode
Quits automatic display of images.The
screen returns to Index mode.

Setting Lists

You can display files in lists.
For list settings, see

page 79

Moving folders

•

Press

select the folder and press

Moving the folder up one level

•

Select

and press

Changing the page displayed

•

Select

and press

Projecting a file

•

Press

to select the

image file and press

•

The selected image is displayed.

•

If you press

while the image is

displayed, the submenu is displayed.

•

Proceeds to the next page.

•

Previous
Moves back one page.

•

Rotate (right)
Turns the image to the right by 90°.

•

Rotate (left)
Turns the image to the left by 90°.

•

Index Mode
Quits automatic display of images.The
screen returns to Index mode.

Summary of Contents for Notevision PG-M25X




































































































































Search results

Summary of Contents for Notevision PG-M25X

Reviews:

Related manuals for Notevision PG-M25X

Brands by name

Popular brands

Sharp Notevision PG-M25X, Operation Manual

Search results

Summary of Contents for Notevision PG-M25X

Reviews:

Related manuals for Notevision PG-M25X

Brands by name

Popular brands