Sharp Notevision PG-M25X Operation Manual Download Page 103

Page: 103 / 131

Easy to Use Functions

-99

Locking the Operation Buttons on the Projector

This function can be used to lock the use of certain operation buttons on the projector.
The following are the three

keylock levels

Keylock Level

Normal

Level A

Level B

Setting up the Keylock

Select “Keylock Level” in the “Options
(2)” menu on the menu screen.

➝

For operating the menu screen, see

pages 50 to 55

Note

•

If a password has been set, the password
input box will be displayed when select-
ing the “Keylock Level”.

Canceling the Keylock
Setting

When the Keylock Level is set to “Normal”,
all buttons are functional.

Select “Keylock Level” in the “Options
(2)” menu and set “

Normal” on the

menu screen.

➝

For operating the menu screen using

the GyroRemote see

pages 54

and

Note

•

When a password has been set, and
“Keylock Level” is selected, the password
input box will be displayed.

•

If both a password and the Keylock Level
have been set at the same time, the pass-
word will be necessary before changing
the Keylock Level.

Description

All operation buttons are functional.

Only INPUT/VOLUME/AV MUTE buttons on the projector are available.

All operation buttons on the projector are unavailable.

Summary of Contents for Notevision PG-M25X




































































































































Search results

Summary of Contents for Notevision PG-M25X

Reviews:

Related manuals for Notevision PG-M25X

Brands by name

Popular brands

Sharp Notevision PG-M25X, Operation Manual

Search results

Summary of Contents for Notevision PG-M25X

Reviews:

Related manuals for Notevision PG-M25X

Brands by name

Popular brands