72
Network Settings (cont.)
-72
¤
Setting the
SS ID
Set the projector’s SS ID.
The default setting is “SHARP_PRJ”.
Select “Wireless LAN” in the network
menu on the menu screen
➝
For operating the menu screen, see
pages 50 to 55
.
1
Press
or
to select
“Wireless LAN” and then press
.
2
Press
or
to select
“SS ID” and then press
.
3
Press
or
to select
the characters you want to set.
Note
•
The characters can be entered following:
Letters (A to Z), numerical (0 to 9),
symbols (–, _, ( ))
•
Pressing
or
switches
between procedures as shown below.
•
If you want to delete one character to the
left, select “BS” and press
.
4
Press
.
•
You can also move the cursor using
on the GyroRemote.
Note
•
If you want to correct a letter or symbol,
press
or
to move the cursor to the
character you want to correct, and then use
or
to correct the character.
•
If you want to cancel the settings, press
.
5
Repeat steps 3 and 4 to set all
the characters.
Note
•
A maximum of 16 characters can be set.
6
Press
.
•
The settings are enabled.
Summary of Contents for Notevision PG-M25X
