Basic Operation
-43
TEACH button
LED
indicator
Registered
TEACH button
ENTER button
3
Press
on the GyroRemote
you want to register.
•
The LED indicator on the GyroRemote
blinks.
•
“Registered” is displayed at the bottom
of the screen for a few seconds and
registration starts.
When storing is complete, “Learn
Mode” is displayed.
Note
•
If no action is taken for more than 5
minutes, the projector exits from the
Learn mode.
4
Press
•
This completes the Registration mode.
Registering Multiple
GyroRemotes in One
Projector
A maximum of 8 GyroRemotes can be registered.
1
Set the same channel for the
RF channel of the GyroRemote
you want to register.
•
For details on the setting, see
page
42
.
2
Using step 3 in “Registering
the GyroRemote in the Projec-
tor”, press
on the
GyroRemotes to be registered.
•
When registering other GyroRemotes
continuously, after each GyroRemote
is registered and the Registration
mode message is displayed, proceed
with the next GyroRemote.
•
After 8 GyroRemotes have been reg-
istered, the Registration mode will
automatically terminate.
3
Press
when the number of
registered GyroRemotes is
fewer than 8.
•
This ends the Registration mode.
Note
•
Contact your nearest Sharp Autho-
rized Projector Dealer or Service
Center if you need to use an addi-
tional GyroRemote unit.
Summary of Contents for Notevision PG-M25X
