manualshive.com logo in svg

Sharp MX-M503N, Operation Manual, Page: 804 / 806

Share
Download
Sharp MX-M503N Operation Manual Download Page 804

8-44

TROUBLESHOOTING

Contents

Stapling does not take 
place (including 
pamphlet stapling).

Does a message appear instructing you 
to add staples?

Replace the staple cartridge. Do not forget to replace 
the staple case.

☞

"

REMOVING STAPLE JAMS

" (page 8-7)

Is a different width of paper mixed in?

Stapling is not possible when paper of different widths 
are mixed together. To perform mixed size stapling, use 
paper of the same width and select the [Same Width] 
setting. When copying, select [Same Width] from [Mixed 
Size Original] in the special modes.

Are there more sheets than can be 
stapled at once?

For the maximum number of sheets that can be stapled, 
see "SPECIFICATIONS" in the Safety Guide.

Is a paper size that cannot be stapled 
included in the print job?

For the paper sizes that can be stapled, see 
"SPECIFICATIONS" in the Safety Guide.

Is the paper type setting of the tray 
selected in the printer driver set to a 
paper type that cannot be stapled?

Check the paper type settings in the machine and select 
a tray that has paper that can be used for stapling*. 
Click the [Tray Status] button in "Paper Selection" on 
the [Paper] tab of the printer properties window and 
check the paper type setting of each tray.
* Stapling is not possible on labels, tab paper, 

transparency film, or envelopes. In addition, if "Disable 
Staple" is selected in the user type, stapling will not be 
possible.

Is the paper type setting of the selected 
paper tray set to heavy paper?

Pamphlet stapling is not possible on heavy paper. 
(However, when cover insertion is selected, pamphlet 
stapling is possible when a single sheet of heavy paper 
is inserted for use as a cover.)

Have functions been disabled by the 
administrator?

Some functions may have been disabled in the system 
settings (administrator). Check with your administrator.

Punching does not 
take place.

Does a message appear instructing you 
to check the punch module?

Dispose of punch scraps.

☞

1. BEFORE USING THE MACHINE "

PUNCH 

MODULE

" (page 1-54)

Is a different size of paper mixed in?

Punching is not possible when different widths of paper 
are mixed together. To perform mixed size punching, 
use paper of the same width and select the [Same 
Width] setting. When copying, select [Same Width] for 
[Mixed Size Original] in the special modes.

Is a paper size that cannot be punched 
included in the print job?

For the paper sizes that can be punched, see 
"SPECIFICATIONS" in the Safety Guide.

Is the tray selected in the printer driver 
set to a paper type that cannot be 
punched?

Check the paper type settings in the machine and select 
a tray that has paper that can be used for punching*. 
Click the [Tray Status] button in "Paper Selection" on 
the [Paper] tab of the printer properties window and 
check the paper type setting of each tray.
* Punching is not possible on labels, tab paper, 

transparency film, and envelopes. In addition, if 
"Disable Punch" is selected in the user type, punching 
will not be possible.

Problem

Point to check

Solution

Summary of Contents for MX-M503N







































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments