Sharp MX-M503N Operation Manual Download Page 434

Page: 434 / 806

4-101

Press the [START] key.

Your machine will call the other machine and initiate reception of the fax.

• Polling reception can be used in combination with the timer function to poll at any specified time, such as at night or when

you are not present (Only one timer polling reception can be set.).

• This function can only be used when the other machine is Super G3 or G3 compatible and has a polling function.

• The receiving machine bears the expense (phone charges) of the polling reception.

To cancel polling reception...

Touch the [Polling] key in the screen of step 1 so that it is not highlighted.

Summary of Contents for MX-M503N







































































































































































































































































































































































































































































































































































































































































































































































































































Sharp MX-M503N, Operation Manual, Page: 434 / 806

Search results

Summary of Contents for MX-M503N

Reviews: