Sharp MX-M503N Operation Manual Download Page 102

Page: 102 / 806

1-61

BEFORE USING THE MACHINE

Contents

Open the automatic document feeder
and remove the glass cleaner.

Clean the document scanning area on
the document glass with the glass
cleaner.

Clean the document scanning area in
the automatic document feeder with the
glass cleaner.

(1) Open the document feeder cover.

(2) Open the document feeder tray.

(3) Clean the scanning area in the automatic

document feeder.

(4) Close the document feeder tray.

(5) Close the document feeder cover.

On the MX-M283N, this cleaning is not necessary.

Replace the glass cleaner.

(1)

(2)

(5)

(4)

Summary of Contents for MX-M503N







































































































































































































































































































































































































































































































































































































































































































































































































































Sharp MX-M503N, Operation Manual, Page: 102 / 806

Search results

Summary of Contents for MX-M503N

Reviews: