manualshive.com logo in svg

Sharp MX-M503N, Operation Manual, Page: 472 / 806

Share
Download
Sharp MX-M503N Operation Manual Download Page 472

5-3

SCANNER/INTERNET FAX

Contents

This section provides information that you should know before using the machine as a network scanner.

NETWORK SCANNER FUNCTION

The network scanner function of the machine can be used to scan an original, create an image file, and send the file 
over a network to a computer, FTP server, or other destination. Scanning is also possible from your computer using a 
TWAIN-compliant application.
The network scanner function provides the following scanning modes.

☞

 

SENDING AN IMAGE IN SCAN MODE

 (page 5-28)

Scan to E-mail

The scanned file is sent to an e-mail address.

Scan to FTP

The scanned file is sent to a specified directory of an FTP server.
When the file is sent, it is also possible to send an e-mail to a previously stored e-mail 
address to inform the recipient of the location of the file. (This is called "Scan to FTP 
(Hyperlink)".)

Scan to Desktop

The scanned file is sent to a specified folder on your computer.
To use Scan to Desktop, software must be installed from the "Sharpdesk/Network Scanner 
Utilities" CD-ROM that accompanies the machine. For the system requirements of the 
software, see the manual (PDF format) or the Readme file on the CD-ROM. For the 
procedures for installing the software, see the "Sharpdesk Installation Guide".

Scan to Network Folder

The scanned file is sent to a network folder on a Windows computer on the same network as 
the machine.

BEFORE USING THE MACHINE AS A 
NETWORK SCANNER

Scan modes

Summary of Contents for MX-M503N







































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments