Sharp MX-M503N Operation Manual Download Page 550

Page: 550 / 806

5-81

SCANNER/INTERNET FAX

Contents

WHITENING FAINT COLOURS IN THE IMAGE
(Suppress Background)

This feature is used to suppress light background areas.

• This function cannot be used in Internet fax mode.

• When using USB memory mode, connect the USB memory device to the machine before performing the procedure below.

Place the original.

Place the original face up in the document feeder tray, or face down on the document glass.

Specify the destination.

☞

ENTERING DESTINATIONS

(page 5-18)

When scanning to USB memory, there is no need to specify the destination. Go to step 3.

Select the special modes.

(1) Touch the tab of the mode that you wish to use.

(2) Touch the [Special Modes] key.

(3) Touch the [Suppress Background] key.

Read the message that appears and then touch the [OK] key.

☞

SPECIAL MODES

(page 5-71)

The lightness level at which
suppression takes place
can be adjusted.

Level [+]

Level [-]

Summary of Contents for MX-M503N







































































































































































































































































































































































































































































































































































































































































































































































































































Sharp MX-M503N, Operation Manual, Page: 550 / 806

Search results

Summary of Contents for MX-M503N

Reviews: