manualshive.com logo in svg

Sharp MX-M503N, Operation Manual, Page: 611 / 806

Share
Download
Sharp MX-M503N Operation Manual Download Page 611

6-14

DOCUMENT FILING

Contents

4

Select copy settings and then press the [START] key.

• Copying begins and the scanned document image is saved to the hard drive.

The selected copy settings are also saved.

• For the procedure for placing the original, see step 4 of "

SAVING A FILE WITH "Quick File"

" (page 6-11).

To cancel scanning...

Press the [STOP] key (

).

When a file is stored using File without appending file information, the following user name and file name are automatically 
assigned to the file.

User Name: User Unknown
File Name: Mode_Day-Month-Year_Hour-Minute-Second

(Example: Copy_04042010_112030)

Stored to:

Main Folder

When user authentication is used, the user name that was used for login is automatically selected.

To cancel the File operation...

Touch the [Cancel] key in the screen of step 3.

Summary of Contents for MX-M503N







































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments