manualshive.com logo in svg

Sharp e-Copy ShareScan OP 3.0, Configuration Manual

Share
Download
Sharp e-Copy ShareScan OP 3.0 Configuration Manual Download Page 16

10 

|

 Configuring eCopy ShareScan OP

Generating a license report

The license report will help you recover your product keys and license codes, if necessary. You 
should generate a license report whenever you activate your licenses. Keep the report in a safe 
place in case you need to restore the license information. A printed report is also useful if you need 
to manually activate product keys from another computer.

To generate a license report:

1

In the console tree, select 

System Information > Licensing

.

2

On the 

License Information

 tab, click 

Report

.

3

In the 

Save As

 dialog box, specify where you want to save the file and then click 

Save

.

Managing connectors and services

An eCopy ShareScan OP system can use any of the base connectors provided by eCopy, Inc. as well 
as add-on connectors or services that you have purchased.

Managing connectors and services involves the following tasks:

■

Installing connectors and services (see “Installing connectors and services” on page 10).

■

Removing connectors and services (see “Removing add-on connectors” on page 11).

■

Configuring connectors (see “Configuring connectors” on page 11).

■

Activating connectors (see “Activating connectors” on page 13).

Installing connectors and services

To install a base connector that you did not install during initial installation of the ShareScan OP 
software, run the setup program again and then select the Modify option.

To install an add-on connector or service, you must run the setup program included with it. The 
setup program installs the software and registers it on the ShareScan OP Services Manager. Once 
registered, the connector appears in the console tree and the service appears in the appropriate 
location in the console.

Note:

To refresh the list of connectors, right-click 

Connectors

 and then click 

Refresh Connectors

 or 

click the 

Refresh connectors 

button that appears on the toolbar when the Connectors node is 

selected.

Summary of Contents for e-Copy ShareScan OP 3.0

















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands