manualshive.com logo in svg

Sharp DX-C200, User Manual

Share
Download
Sharp DX-C200 User Manual Download Page 415

1.

Be sure to check the following points:

• The power switch is turned off.
• The power cord is unplugged from the wall outlet.
• All other cables are unplugged from the machine.
• All paper trays are empty.

2.

If tray 2 is installed, remove it.

3.

Return the scanning unit inside the machine to its original position using [Scanner
Carriage] under [System Settings].

• Toner might spill inside the machine if the machine is not kept level during transit.
• For more information about moving the machine, contact your sales or service representative.

• For details about [Scanner Carriage], see p.270 "System Settings".

Moving the Machine

413

Summary of Contents for DX-C200

































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands