manualshive.com logo in svg

Sharp DX-C200, User Manual

Share
Download
Sharp DX-C200 User Manual Download Page 406

Cleaning the Friction Pad and Paper Feed Roller

If the friction pad or paper feed roller is dirty, a multi-feed or jam might occur. In this case, clean the
friction pad and paper feed roller as follows:

• Unplug the power cord from the wall outlet before you move the machine. While moving the

machine, take care that the power cord is not damaged under the machine. Failing to take these
precautions could result in fire or electric shock.

• Do not pull out the paper tray forcefully. If you do, the tray might fall and cause an injury.

• Do not put your hands inside the machine when the input tray is removed. Some internal parts

become hot and are a burn hazard.

• Do not use chemical cleaning fluids or organic solvents such as thinner or benzine.

1.

Turn off the power.

2.

Unplug the power cord from the wall outlet. Remove all the cables from the machine.

3.

Pull out tray 1 carefully with both hands.

CES059

Place the tray on a flat surface. If there is paper in the tray, remove it.

10. Maintenance

404

Summary of Contents for DX-C200

































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands