manualshive.com logo in svg

Sharp DX-C200, User Manual

Share
Download
Sharp DX-C200 User Manual Download Page 404

Cleaning the Toner Density Sensor

Clean the machine when the error message instructing you to do so appears.
This procedure explains how to clean the toner density sensor of the yellow print cartridge as an
example of how to clean a sensor.

• The inside of this machine becomes very hot. Do not touch the parts labeled " " (indicating a

hot surface).

1.

Pull up the lever on the top cover, and then carefully raise the top cover.

Make sure that the ADF is closed.

CES138

2.

Lift out the rearmost print cartridge.

CES086

10. Maintenance

402

Summary of Contents for DX-C200

































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands