manualshive.com logo in svg

Sharp DX-C200, User Manual

Share
Download
Sharp DX-C200 User Manual Download Page 398

• Make sure the transfer unit is installed. If the transfer unit is not installed, install it before turning on

the power.

• Comply with the waste toner bottle Recycling Program, whereby used waste toner bottles are

collected for processing. For details, ask your sales or service representative.

• Before removing the waste toner bottle from the machine, spread paper or similar material around

the area to keep toner from dirtying your workspace.

1.

Pull the opening lever on the front cover, and then carefully lower the front cover.

CES141

2.

Slide both levers on the front cover forward.

CER014

3.

Holding the tabs on both ends of the transfer unit, tilt it backwards then lift it up.

CER015

9. Troubleshooting

396

Summary of Contents for DX-C200

































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands