manualshive.com logo in svg

Sharp DX-C200, User Manual

Share
Download
Sharp DX-C200 User Manual Download Page 329

Network Print Setting

Item

Description

IPP

Select to enable network printing using Internet Print Protocol (via TCP port
631/80).

FTP

Select to enable network printing using an embedded FTP server in the
machine (via TCP port 20/21).

RAW

Select to enable network raw printing.

Port No.

Enter the TCP port number to use for raw printing. The valid range is 1024
to 65535, except 53550 (default is 9100).

LPR

Select to enable network printing using LPR/LPD (via TCP port 515).

mDNS Setting

Item

Description

mDNS

Select to enable Multicast DNS (via UDP port 5353). If disabled, the item
below cannot be configured.

Printer Name

Enter the name of the machine. Can contain up to 32 characters.

Configuring the DNS Settings

Click the [DNS] tab on the network settings page to configure the DNS settings.

Configuring the Network Settings

327

Summary of Contents for DX-C200

































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands