manualshive.com logo in svg

Sharp DX-C200, User Manual

Share
Download
Sharp DX-C200 User Manual Download Page 114

6.

Set the envelopes in Tray 1 with the printing side facing up.

CER111

Make sure envelopes are not stacked higher than the upper limit (lower line) mark inside the tray.

CER050

7.

Carefully push Tray 1 straight into the machine.

CER051

To avoid paper jams, make sure the tray is securely inserted.

• Be sure to load envelopes so that their flaps are on the right. If you do not, the envelopes will

become creased.

• If printed envelopes come out badly creased, load the envelopes in the opposite direction, and

then rotate the print object by 180 degrees using the printer driver before printing. For details, see
the printer driver Help.

2. Getting Started

112

Summary of Contents for DX-C200

































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands