Sharp DX-C200 User Manual Download Page 348

Page: 348 / 448

Restoring the Machine's Settings from a Backup File

Click the [Restore Setting] tab on the administrator settings page to restore the machine's settings from a
previously created backup file.

• When the machine is returned from repair, it is important that you restore the machine's settings

from the backup files. The machine's settings are returned to the default after repair.

Restore Setting

Item

Description

File to Restore

Enter the path and name of the file to restore, or click [Browse] to select the
file.

Follow the procedure below to restore configuration backup files.

Click [Browse].

Navigate to the directory containing the backup file to restore.

Select the backup file, and click [Open].

Enter the administrator password if required.

Click [OK].

• If the settings are not restored successfully, an error message appears. Try again to restore the file

completely.

Configuring the Date and Time Settings

Click the [Set Date/Time] tab on the administrator settings page to configure the date and time settings.

8. Configuring the Machine Using Web Image Monitor

346

Summary of Contents for DX-C200

































































































































































































































































































































































































































































Search results

Summary of Contents for DX-C200

Reviews:

Brands by name

Popular brands

Sharp DX-C200, User Manual

Search results

Summary of Contents for DX-C200

Reviews:

Brands by name

Popular brands