manualshive.com logo in svg

Sharp DX-C200, User Manual

Share
Download
Sharp DX-C200 User Manual Download Page 361

3.

Using both hands, carefully push up the front cover until it closes.

CES142

• Do not pull out the paper tray (Tray 1).
• If paper is jammed in tray 2 but is difficult to locate, pull out tray 2 to remove it. After removing the

paper, carefully push tray 2 all the way back inside the machine.

• When closing the front cover, push the upper area of the cover firmly. After closing the cover,

check that the error is cleared.

If paper jams inside the transfer unit

If paper jams inside the transfer unit, follow the procedure below to remove it.

1.

Pull the opening lever on the front cover, and then carefully lower the front cover.

CES141

Paper Feed Problems

359

Summary of Contents for DX-C200

































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands