manualshive.com logo in svg

Sharp DX-C200, User Manual

Share
Download
Sharp DX-C200 User Manual Download Page 409

• Do not put your hands inside the machine when the input tray is removed. Some internal parts

become hot and are a burn hazard.

• Do not use chemical cleaning fluids or organic solvents such as thinner or benzine.
• Do not touch the transcription roller (shown in the illustration below).

1.

Turn off the power.

2.

Unplug the power cord from the wall outlet. Remove all the cables from the machine.

3.

Pull out tray 1 carefully with both hands.

CES059

Place the tray on a flat surface. If there is paper in the tray, remove it.

Cleaning

407

Summary of Contents for DX-C200

































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands