manualshive.com logo in svg

Sharp DX-C200, User Manual

Share
Download
Sharp DX-C200 User Manual Download Page 186

• This machine does not support the use of USB flash disks connected to external USB hubs. Insert

your USB flash disk directly into the USB flash disk port located at the top left corner of the
machine.

• Certain types of USB flash disks cannot be used.

1.

Insert your USB flash disk into the USB flash disk port.

CES199

2.

Press the [Scanner] key.

CES175

"Loading..." appears on the display. Wait until the display changes to show "Save Scn Data to
USB" (the duration depends on your USB flash disk).

3.

Place the original on the exposure glass or in the ADF.

If necessary, configure advanced scan settings.

5. Using the Scanner Function

184

Summary of Contents for DX-C200

































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands