manualshive.com logo in svg

Sharp DX-C200, User Manual

Share
Download
Sharp DX-C200 User Manual Download Page 287

Shows the version of the machine's bootloader.

• Firmware Version

Shows the version of the machine's firmware.

• Engine FW Version

Shows the version of firmware for the machine engine.

Paper Input

Information about tray 2 appears only when it is installed.

• Tray 1

Shows paper size and type settings.

• Tray 2

Shows paper size and type settings.

• Bypass Tray

Shows paper size and type settings.

• Tray Priority

Shows the fax, printer, and copy priority tray settings.

• Bypass Tray Priority

Shows the bypass tray priority settings.

• B&W Print Priority

Shows the black-and-white print priority setting.

• Notify:TonerAlmstEmpty

Shows the toner near-end notification setting.

Supplies Status

Shows information about supply levels.

• Toner (Black)
• Toner (Magenta)
• Toner (Yellow)
• Toner (Cyan)
• Fusing Unit
• Int. Transfer Unit
• Transfer Roller
• Waste Toner Bottle

Counter

Shows counter information.

Printing Lists/Reports

285

Summary of Contents for DX-C200

































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands