manualshive.com logo in svg

Sharp DX-C200, User Manual

Share
Download
Sharp DX-C200 User Manual Download Page 267

Communication Settings

• ECM Transmission

Sets the machine to automatically resend parts of the data that are lost during transmission.
This function is not available with Internet Fax transmission.
Default: [On]

• Off
• On

• ECM Reception

Sets the machine to automatically receive parts of the data that are lost during reception.
This function is not available with Internet Fax reception.
Default: [On]

• Off
• On

• Dial Tone Detect

Sets the machine to detect a dial tone before the machine begins to dial the destination
automatically.
Default: [Detect]

• Detect
• Not Detect

• Transmission Speed

Specifies the transmission speed for the fax modem.
Default: [33.6 Kbps]

• 33.6 Kbps
• 14.4 Kbps
• 9.6 Kbps
• 7.2 Kbps
• 4.8 Kbps
• 2.4 Kbps

• Reception Speed

Specifies the reception speed for the fax modem.
Default: [33.6 Kbps]

• 33.6 Kbps
• 14.4 Kbps

Fax Feature Settings

265

Summary of Contents for DX-C200

































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands