manualshive.com logo in svg

Sharp AL-2061, Operation Manual, Page: 74 / 178

Share
Download
Sharp AL-2061 Operation Manual Download Page 74

72

PRINTER UTILITY

Printer Status Monitor (for general users)

"Printer Status Monitor" is on the "Software CD-ROM".
This allows the user to check on the computer screen whether or not the machine is 
able to print.
It provides information on error states such as paper misfeeds and shows the 
configuration of the machine (number of trays,  etc.) by means of illustrations. 
Available paper sizes and paper remaining are also indicated.

Before using the Printer Status Monitor

Note the following points before using the Printer Status Monitor.

Printing via a server

When the first print job is executed after starting up the Printer Status Monitor, the 
machine's IP address is automatically set in the Printer Status Monitor.

Direct printing without a server

Install and configure the software as explained in "INSTALLING THE PRINTER 
DRIVER" in the software setup guide for network printer. (This is not necessary if the 
software has already been installed and configured.)

• In order to use the Printer Status Monitor, the machine must be 

connected to a network.

• To install the Printer Status Monitor, see page 52.

Summary of Contents for AL-2061



















































































































































































Reviews:

No comments