Sharp AL-2061 Operation Manual Download Page 142

Page: 142 / 178

140

SELECTING A SETTING FOR A USER PROGRAM

Press the [MENU] key and then press the
[OK] key.

In printer mode, the user programs are accessed
by simply pressing the [MENU] key.

Press the [

] key (

) or [

] key (

) to

select the item that you wish to configure
in the USER PROGRAM items, and then
press the [OK] key.

• See "USER PROGRAM" (p.135 to

p.139) for the program name and
program code.

• You can also select a program by

directly entering the program number
with the numeric keys.

Press the [

] key (

) or [

] key (

) to

change the setting of the selected item.

See "USER PROGRAM" (p.135 to p.139) for the
program code.

Press the [OK] key.

Your selection appears briefly and then the previous screen appears.

• If you mistakenly select the wrong item, press the [CLEAR] key

(

) and repeat the procedure from step 2.

• To cancel a setting for a user program, press the [MENU] key.

When "AE LEVEL ADJUST" is selected in the user programs and the
[OK] key is pressed, the automatic exposure adjustment screen
appears. Adjust the exposure and press the [OK] key.

MAIN MENU
1:USER PROGRAM

USER PROGRAM
2:PREHEAT MODE

PREHEAT MODE
2:1 MIN

Summary of Contents for AL-2061



















































































































































































Search results

Summary of Contents for AL-2061

Reviews:

Sharp AL-2061, Operation Manual, Page: 142 / 178

Search results

Summary of Contents for AL-2061

Reviews: