manualshive.com logo in svg

Sharp AL-2061, Operation Manual, Page: 50 / 178

Share
Download
Sharp AL-2061 Operation Manual Download Page 50

INSTALLING THE SOFTWARE

48

12

Follow the on-screen instructions.

Read the message in the window that appears and click the "Next" button.
Installation begins.

13

When the installation completed screen appears, click the "OK" 
button.

14

Click the "Close" button.

This completes the installation of the software.

• After installation, see "CONFIGURING THE PRINTER DRIVER" (p.55) to check 

the printer driver settings.

• To install the Printer Status Monitor, see "Installing the printer status monitor" 

(p.52).

• To install the PC-Fax, see part 11 page 43-44.

•

If you are using Windows 2000/XP/Server 2003

If a warning message regarding the Windows logo test or digital 
signature appears, be sure to click the "Continue Anyway" or "Yes" 
button.

•

If you are using Windows Vista/7/Server 2008

If a security warning window appears, be sure to click "Install this 
driver software anyway".

After the installation, a message prompting you to restart your computer 
may appear. In this case, click the "Yes" button to restart your computer.

Summary of Contents for AL-2061



















































































































































































Reviews:

No comments