manualshive.com logo in svg

Sharp AL-2061, Operation Manual, Page: 17 / 178

Share
Download
Sharp AL-2061 Operation Manual Download Page 17

15

PREPARATIONS

6

Press the [OK] key.

7

Press the [MENU] key.

Press the [MENU] key to exit.

Initial settings

The machine reverts to the initial settings when it is first turned on, when the [CLEAR 
ALL] key (

) is pressed, or when no keys are pressed for the preset "AUTO 

CLEAR" time following the end of a copy job. When the machine reverts to the initial 
settings, all settings and functions selected to that point are canceled. The "AUTO 
CLEAR" can be changed in the user programs. (p.135)

Scanning unit (scan head)

When the machine is able to copy or scan (the ready indicator is on), the scanning 
unit is lit.

To change the date and time or the format after once they are set, see 
page 138 (USER PROGRAMS) and select program number 31 or 32 of 
copy mode.

Copy ratio: 

100%, 

Exposure:

 Automatic

Copy quantity:

 0, 

All special copier modes:

 Off

AL-2061

 

The main screen of
copy mode appears

When in the copy mode

Summary of Contents for AL-2061



















































































































































































Reviews:

No comments