manualshive.com logo in svg

Sharp AL-2061, Operation Manual, Page: 163 / 178

Share
Download
Sharp AL-2061 Operation Manual Download Page 163

161

TD (TONER/DEVELOPER) CARTRIDGE REPLACEMENT

When toner is low, the error indicator will light up and "TD CARTRIDGE IS NEAR 
EMPTY" will appear in the display. For information on purchasing a new TD 
cartridge, see START GUIDE. If copying is continued while the indicator is lit, copies 
will gradually become lighter  until the toner runs out. When the toner runs out, the 
machine will stop operating, the error indicator will blink, and "REPLACE THE TD 
CARTRIDGE" will appear in the display. Follow the procedure below to replace the 
TD cartridge.

1

Open the bypass tray, and 
then open the side cover 
while pressing the side 
cover open button.

2

Push gently on both sides of 
the front cover to open the 
cover.

During a long copy run of a dark original, "TONER REPLENISHMENT 
IN PROGRESS" appears in the display, and the machine may stop even 
though toner is left. The machine will feed toner up to 2 minutes and 
then the ready indicator will light up. Press the [START] key (

) to 

resume copying.

Summary of Contents for AL-2061



















































































































































































Reviews:

No comments