manualshive.com logo in svg

Sharp AL-2061, Operation Manual, Page: 165 / 178

Share
Download
Sharp AL-2061 Operation Manual Download Page 165

TROUBLESHOOTING AND MAINTENANCE

163

6

Close the front cover and 
then the side cover by 
pressing the round 
projections near the side 
cover open button. The error 
indicator will go out and the 
ready indicator will light up.

7

DRUM CARTRIDGE REPLACEMENT

The useful life of the drum cartridge is approximately 18,000 copies. When the 
internal counter reaches approximately 17,000 copies, the error indicator will light up 
and "A DRUM CARTRIDGE WILL BE NEEDED SOON" will appear in the display. 
For more information on purchasing a drum cartridge, see START GUIDE. When the 
error indicator blinks and "REPLACE THE DRUM CARTRIDGE" appears in the 
display, the machine will stop operating until the cartridge is replaced. Replace the 
drum cartridge at this time.

1

Remove the TD cartridge (see "TD (TONER/DEVELOPER) 
CARTRIDGE REPLACEMENT" (p.161)).

When closing the covers, be sure to close the front cover securely and 
then close the side cover. If the covers are closed in the wrong order, 
the covers may be damaged.

Do not remove the protective cover on the drum portion (black paper) of 
a new drum cartridge before use. The cover protects the drum against 
external light.

Summary of Contents for AL-2061



















































































































































































Reviews:

No comments