manualshive.com logo in svg

Sharp AL-2061, Operation Manual, Page: 155 / 178

Share
Download
Sharp AL-2061 Operation Manual Download Page 155

TROUBLESHOOTING AND MAINTENANCE

153

Troubleshooting for network connection

■

Is the LAN cable 
disconnected?

Make sure that the LAN cable is firmly inserted in the 
connectors and your computer.

■

Is the machine 
configured for use on 
the same network as 
the computer?

The machine cannot be used if it is not connected to 
the same network as the computer, or if it is not 
configured for use on the network.
For more information, consult your network 
administrator.

■

Are you using a port 
that was created with 
Standard TCP/IP 
Port?

If you are using a port created using Standard TCP/IP 
Port, printing may not take place correctly if "SNMP 
Status Enabled" is selected in the port settings of the 
printer driver. Open the printer driver properties and 
click the "Configure Port" button on the "Ports" tab. In 
the window that appears, make sure the "SNMP 
Status Enabled" checkbox is not selected.

Summary of Contents for AL-2061



















































































































































































Reviews:

No comments