manualshive.com logo in svg

Sharp AL-2061, Operation Manual, Page: 169 / 178

Share
Download
Sharp AL-2061 Operation Manual Download Page 169

TROUBLESHOOTING AND MAINTENANCE

167

TD (Toner/Developer) cartridge and drum cartridge

1

Remove the TD (Toner/Developer) cartridge and drum cartridge 
as explained in "TD (TONER/DEVELOPER) CARTRIDGE 
REPLACEMENT" (p.161) and "DRUM CARTRIDGE 
REPLACEMENT" (p.163).

2

Wipe the parts of the TD (Toner/Developer) cartridge and drum 
cartridge shown below with a clean cloth.

Wipe only the parts that are indicated in the illustration.

3

Replace the TD (Toner/Developer) cartridge and drum cartridge 
as explained in "TD (TONER/DEVELOPER) CARTRIDGE 
REPLACEMENT" (p.161) and "DRUM CARTRIDGE 
REPLACEMENT" (p.163).

If copies start becoming streaky or blotchy, the transfer charger may be dirty. Clean 
the charger using the following procedure.

4

• Do not touch the surface of the drum (green portion). 

Doing so may cause smudges on the copies.

• When cleaning the TD cartridge, do not tilt or shake it. Toner may spill 

out and soil your clothes.

Summary of Contents for AL-2061



















































































































































































Reviews:

No comments