manualshive.com logo in svg

Sharp AL-2061, Operation Manual, Page: 12 / 178

Share
Download
Sharp AL-2061 Operation Manual Download Page 12

10

POWER ON AND OFF

The power switch is located on the left side of the machine.

Power on

Turn the power switch to the "ON" position.

The ready indicator will light up and other 
indicators which show the initial settings of the 
display will also light up to indicate the ready 
condition. For the initial settings, see the 
"Initial settings" (see page 15).

You can select copy settings and press the [START] key (

) after the power 

switch is turned on. Copying will start automatically.

Language setting

The first time the power is turned on after shipment from the factory, a message will 
appear in English in the display asking you to select the language. Select the 
language with the [

] key (

) or [

] key (

) and then press the [OK] key.

The language can also be changed in the user programs (p.138).

If you use the machine in a country other than the country 
where the machine was purchased, you will need to make sure 
that your local power supply is compatible with your model. If 
you plug the machine into an incompatible power supply, 
irreparable damage to the machine will result.

Only insert the power cord into a properly grounded wall socket.
Do not use extension cords or power strips.

Summary of Contents for AL-2061



















































































































































































Reviews:

No comments