Sharp Actius PC-MV10 Operation Manual Download

Page: 93 / 144

5-6

LAN unit

You can connect to a LAN (Local Area Network) with the 100 Base-TX/10 Base-T
LAN unit on your computer. To activate the LAN unit, perform the following
steps.

Use a category 3 or a category 5 LAN cable when connecting to 10
BASE-T LAN, and the category 5 only when connecting to 100 BASE-TX
LAN.

Connect your computer to LAN

Turn off the computer.

If your computer is provided with the LAN cable, go to the step 4. If with the
core for a LAN cable, go to the next step.

Attach the provided core to one end of your LAN cable. Insert the cable into
the core and close the core until it clicks.

Open the cover of the LAN jack on the left side of your computer.

To avoid damaging the LAN unit, close the LAN jack cover after you
finish using the LAN unit.

Modem Jack

LAN Jack

Summary of Contents for Actius PC-MV10

















































































































































Search results

Summary of Contents for Actius PC-MV10

Reviews:

Related manuals for Actius PC-MV10

Brands by name

Popular brands

Sharp Actius PC-MV10, Operation Manual

Search results

Summary of Contents for Actius PC-MV10

Reviews:

Related manuals for Actius PC-MV10

Brands by name

Popular brands