Sharp Actius PC-MV10 Operation Manual Download

Page: 132 / 144

T-5

rou

bleshoo

ting

Trouble with the Hard Disk

Question: Why can't I read or write data to/from the hard disk?

•

Confirm the drive and file names are correct.

•

Confirm the hard disk has sufficient free space.

Trouble with the Optical Drive

Question: If the message requiring Windows 2000 CD-ROM appears?

•

Type

C:\i386

in Copy files from: dialog box.

Question: Why can’t I read data from a compact disc or play files?

•

Confirm the CD is inserted correctly.

•

Confirm the drive and file names are correct.

•

Confirm the CD is not stained or scratched.

•

Confirm the CD or files are supported.

•

Confirm the optical drive unit is correctly installed to the computer.

Question: Why the drive does not open?

•

Confirm the computer is turned on.

•

If the computer is turned off, insert a fine rod into the drive tray ejection hole.

Question: Why can’t I read data from a disk or play files?

•

Confirm the disk is inserted correctly.

•

Confirm the drive and file names are correct.

•

Confirm the disk is not stained or scratched.

•

Confirm the disk or files are supported.

Summary of Contents for Actius PC-MV10

















































































































































Search results

Summary of Contents for Actius PC-MV10

Reviews:

Related manuals for Actius PC-MV10

Brands by name

Popular brands

Sharp Actius PC-MV10, Operation Manual

Search results

Summary of Contents for Actius PC-MV10

Reviews:

Related manuals for Actius PC-MV10

Brands by name

Popular brands