Sharp Actius PC-MV10 Operation Manual Download

Page: 42 / 144

2-13

Displaying Video on Your TV Set

You can connect a television set with S-Video input to your computer and enjoy
DVD video on a big display.

•

Before connecting the television set, disconnect the external monitor.

•

Connect the computer and the television set directly. Otherwise, the
screen may be distorted.

Connecting a TV Set

Turn off the computer and the television set.

Connect the television set to your computer.

Turn on the computer and the television set.

Right-click somewhere on the Windows desktop.

Click Properties from the pull-down menu.

Click Advanced… in Settings tab.

Select Intel® Graphic Technology; then, click Graphic Properties.

Select TV and click OK three times.

If you can see the screen image on the television set, click Yes.

10. Click OK and close Display Properties dialog box.

Audio
Output
Jack

Stereo
Mini
Plug

S Video
Output
Jack

To S Video Input Jack

To Audio Input Jacks:

White Plug to Left
Red Plug to Right

Summary of Contents for Actius PC-MV10

















































































































































Search results

Summary of Contents for Actius PC-MV10

Reviews:

Related manuals for Actius PC-MV10

Brands by name

Popular brands

Sharp Actius PC-MV10, Operation Manual

Search results

Summary of Contents for Actius PC-MV10

Reviews:

Related manuals for Actius PC-MV10

Brands by name

Popular brands