Sharp Actius PC-MV10 Operation Manual Download

Page: 44 / 144

2-15

Controlling Audio

You can control the output volume of your computer by the following steps.

With the Volume Control

Turn the volume control on the left side of the computer backward you to increase
the volume. Turn it toward you to decrease the volume.

In Windows 2000

Click Start – Settings - Control Panel.

Double-click Sounds and Multimedia icon.

In Sounds and Multimedia Properties dialog box, slide the lever to control
the output volume.

Click OK and close Control Panel window.

Check the box of Show volume control on the taskbar on Step 3 above.
Next time you find the speaker icon on the taskbar, and it is easy to
control volume.

If you want to control the output volume of each source individually:

Click Start - Settings – Control Panel.

Double-click Sounds and Multimedia icon.

In Sounds and Multimedia Properties dialog box, click Volume of Sound

Playback in Audio tab.

Slide the lever of the source that you want to control.

Close the dialog box, then; click OK and close Control Panel window.

Increases
the volume

Decreases
the volume

Summary of Contents for Actius PC-MV10

















































































































































Search results

Summary of Contents for Actius PC-MV10

Reviews:

Related manuals for Actius PC-MV10

Brands by name

Popular brands

Sharp Actius PC-MV10, Operation Manual

Search results

Summary of Contents for Actius PC-MV10

Reviews:

Related manuals for Actius PC-MV10

Brands by name

Popular brands