Sharp 679 User Manual Download Page 30

Page: 30 / 219

From the display, touch the document that you want to print.

If necessary, conﬁgure other print settings.

Send the print job.

To print another document, touch

USB Drive

Warning—Potential Damage:

To avoid loss of data or printer malfunction, do not touch the ﬂash drive or

the printer in the area shown while actively printing, reading, or writing from the memory device.

Supported ﬂash drives and ﬁle types

Flash drives

Notes:

–

The printer supports high

‑

speed USB ﬂash drives with full

‑

speed standard.

–

USB ﬂash drives must support the File Allocation Table (FAT) system.

Many ﬂash drives are tested and approved for use with the printer. For more information, contact the place
where you purchased the printer.

File types

Documents:

•

.doc or .docx

•

.xls or .xlsx

•

.ppt or .pptx

•

.pdf

•

.xps

Printing

Summary of Contents for 679




























































































































































































































Search results

Summary of Contents for 679

Reviews:

Related manuals for 679

Brands by name

Popular brands

Sharp 679, User Manual

Search results

Summary of Contents for 679

Reviews:

Related manuals for 679

Brands by name

Popular brands