Sharp 679 User Manual Download Page 171

Page: 171 / 219

Action

Yes

Step 3

Check the status of the imaging unit.

From the control panel, navigate to:

Settings

Reports

Device

Device Statistics

From the Supply Information section of the pages printed,
check the status of the imaging unit.

Is the imaging unit near end of life?

Go to step 4.

Contact your

dealer

Step 4

Replace the imaging unit.

Print the document.

Is the print mottled?

Contact your

dealer

. The problem is

solved.

Paper curl

Action

Yes

Step 1

Check if the paper loaded is supported.

Note:

If paper is not supported, then load a supported paper.

Print the document.

Is the paper curled?

Go to step 2.

The problem is
solved.

Step 2

Check if the printer is using a genuine and supported toner
cartridge.

Note:

If the cartridge is not supported, then install a

supported one.

Print the document.

Is the paper curled?

Go to step 3.

The problem is
solved.

Troubleshooting

171

Summary of Contents for 679




























































































































































































































Search results

Summary of Contents for 679

Reviews:

Related manuals for 679

Brands by name

Popular brands

Sharp 679, User Manual

Search results

Summary of Contents for 679

Reviews:

Related manuals for 679

Brands by name

Popular brands