- 77 -
6-8-2. Write Command
※
Each “WRITE” Command’s interval must be guaranteed at least 150ms. If you command
another one within 150ms, the indicator will not response. (Under “Check-Sum”, the
interval will be 200ms).
P.C ->> SI 4300
Command
SI 4300 Response
STX ID NO. WHIG (Including Decimal
point 7/8 byte) ETX
Over Range Setting
ACK or NAK
STX ID NO. WLOW (Including Decimal
point 7/8 byte) ETX
Under Range Setting
ACK or NAK
STX ID NO. WDAT(6byte) ETX
Date Setting
ACK or NAK
STX ID NO. WTIM(6byte) ETX
Time Setting
ACK or NAK
STX ID NO. WSNO(6byte) ETX
Serial No. Setting
ACK or NAK
STX ID NO. WPNO(2byte) ETX
Part No. Setting
ACK or NAK
STX ID NO. WPSN (6byte) ETX
Pass Count Setting
ACK or NAK
STX ID NO. WOSN (6byte) ETX
Over Count Setting
ACK or NAK
STX ID NO. WUSN (6byte) ETX
Under Count Setting
ACK or NAK
STX ID NO. WPRT ETX
Print Command
ACK or NAK
STX ID NO. WSPR ETX
Sub-Total Print Command
ACK or NAK
STX ID NO. WGPR ETX
Grand-Total Print Command
ACK or NAK
STX ID NO. WTAR ETX
TARE Setting
ACK or NAK
STX ID NO. WTRS ETX
TARE Reset Setting
ACK or NAK
STX ID NO. WZER ETX
ZERO Setting
ACK or NAK
STX ID NO. WSTC ETX
Sub-Total Delete Command
ACK or NAK
STX ID NO. WGTC ETX
Grand-Total Delete Command
ACK or NAK
STX ID NO. WHOL ETX
HOLD Setting
ACK or NAK
STX ID NO. WHRS ETX
HOLD Reset Command
ACK or NAK
