Sewhacnm SI 4300, Operation Manual

Page: 8 / 86

- 8 -
3-5-1. Status Lamp (ANNUNCIATORS) : “ ▼ ” Lamp is “ON”.
Steady When the weight is Steady, “ ▼ ” Lamp is turn on.
Zero
When the current weight is Zero, “ ▼ ” Lamp is turn on.
(Displayed weight is Zero, “ ▼ ” Lamp is turn on.)
Tare
Tare function is set, “ ▼ ” Lamp is turn on.
(Tare Reset Æ “ ▼ ” Lamp is turn off.)
Hold
When “Hold” key is input, “ ▼ ” Lamp is turn on.
Gross
When display Gross weight(Net Tare Weight), “ ▼ ” Lamp is turn on.
(Under F19-01 setting)
Print When print key input or Auto print, “ ▼ ” Lamp is turn on.
Comm.
When indicator transfers or receives data from other devices, “ ▼ ” Lamp is turn
on. (If the “ ▼ ” is off although there is some data transference, please check
communication settings).
3-5-2. Key Operation
Make Weight value as Zero.
Under F08, you can set the Zero key operation range, as 2%, or 5%, or 10%, or
20% of Max. Capacity.
※
Under “Tare” key input, Zero key will not be activated.
Make Weight value as Zero, including Tare Weight.
Under F09, you can set the Tare key operation range, as 10%, 20%, 50%, or
100% of Max. Capacity.
Tare setting : Under F10-00 setting, “TARE” key input
Under F10-01 setting, “Tare”+ No. key + “Enter”
Remove set TARE value.