Servotronix CDHD2, Manual

Page: 29 / 44

CDHD2
Operator Panel (HMI) 29
Analog Input 1 Zero
Code C 0 0 0 9
Command Analog Input 1 Zero Command
VarCom ANIN1ZERO
Sequence Make sure drive is Disabled.
Select: C0008
Press:
Shift
Display: Flashing 0 . in digit 1
Press: Long Shift
Display: d o n e
(or an error code)
Move Absolute - Distance
Code C 0 0 1 0
Command Move Absolute - distance
VarCom MOVEABS {distance} {velocity}
Sets the distance argument. Command uses velocity value set by JOGSPD1.
Sequence Make sure drive is Enabled.
Select: C0010
Display:
a b s n n
Press:
Long Shift
Display: Flashing 0 . in digit 1
Press: (for example) Set a value of 15 (revolutions)
Press: Long Shift
(motor rotates)
Display: a b S n n (during motor movement)
Display: d o n e
(or an error code)