Servotronix CDHD2, Manual, Page: 8 / 44

CDHD2
8 Operator Panel (HMI)
Table 1-2. Operator Panel Control Keys
Key Name Function
Mode

Switches to next panel display mode (Status >
Parameter > Command > Monitor > Fault >
Status).

While editing, cancels the edited value and returns
to mode menu.
Shift | Enter

Moves the cursor one digit to the left.

Press short: Shows the value of the currently
selected parameter, and enables editing and
setting of the parameter value.

Press long: Applies parameter number or value
Up Parameter:

Press once: Navigates up to next parameter.

Press continuously: Quickly scrolls through
ascending parameter indices. Speed of scrolling
increases the longer the key is pressed.
Value:

Increases value by one increment
Down Parameter:

Press once: Navigates down to next parameter.

Press continuously: Quickly scrolls through
descending parameter indices. Speed of scrolling
increases the longer the key is pressed.
Value:

Decreases value by one increment
Mode

Scrolls to next panel display mode.

While editing, cancels the edited value and moves
to next panel mode.
Shift + Mode Long press (>0.5 second)
Applies parameter value and executes CONFIG.
>> done
Shift + Mode Very long press (>2 seconds)
Executes CONFIG after one second, then executes
SAVE after two seconds.
>> done